Color cup -- you understand how much?

1 basic introduction

Color cup by coaxially arranged the outer cup and the inner cup is composed of two parts, the provision of the interlayer cavity is provided with a filled with thermochromic volatile liquid in the two cup bottom, the lateral wall of theinner cup is carved with the layer cavity through graphic arts channel. Drinking cup into the hot water, heat sensitiveliquid interlayer cavity will produce color change and by the inner cup graphics channel, so that the cup wall showed artistic pattern, make people obtain the aesthetic and artistic enjoyment.

Ceramic color cup: Hot / cold water injection in the cup, will changes color, no color in the previous color: black. Red.Green. Green. Blue. Brown. Purple. Blue. Light yellow. Light green. Pink. Lavender, including network effects, can bedesigned into a color changing glass surface layer.

2 color principle:

Ceramic color cup and glass color cup is divided into hot and cold water discoloration discoloration and color. Heat discoloration Cup temperature color in 40 degrees Celsius above change color cup, cold temperature is below 20 DEG C when the color change, water color still not popularized. Their principle is: the temperature sensing materialis printed on the cup body, the material used to belong to the heat sensitive material, high temperature resistance of 320 DEG C, lead-free, non-toxic, non chromium, can meet the European standard. Out of film, according to the design draft design plate making, printing, drying, baking, and then packaged.

Color cup is generally used thermal transfer supplies, water transfer paper, crystal imaging supplies, AdvertisingMug, color temperature baking cup machine... Temperature pigments different.

3 printing process:

At present the use of the material cup processed into variable cup, one of the three methods used basically:

1, direct printing

2, water transfer printing

3, heat transfer

These three kinds of processing technology.

1, direct printing: refers to the use of roller printing machine printed directly on the cup, the technology is the technical difficulty, the general factory can print one or three colors, if set a high requirement, the color is incapable of action, but the strength of the factory can be as many as 20 color overprint and not go, this technique only suitable for small batch production, efficiency is very low, only printing colors printing, photo effect is very difficult.

2, water transfer printing machine for printing: is in water transfer printing paper, it can be printed out the rich color,also can be produced in large quantities, but relatively high on the environmental requirements, the requirements of printing environment of constant temperature and humidity, in order to ensure printing precision, the completion of the water transfer printing paper is placed in the water, separation pattern and the paper, will be posted to the cup of baking product pattern.

3, the heat transfer printing: printing process with water transfer are basic and same, thermal transfer paper printingmachine will be completed by heating and pressurizing posted to the cup body, water transfer printing, the production of color cup, all people rely on manual operation in posted pattern, and heat transfer is treated by the machine automation, so a modern color cup the factory has a production line, automatic printing, pigment production line and automatic heat transfer decal production line, is the strongest competitive strength.

4 note

1, do not exposure.

2, don't long time to soak in the water.

3, after washing, do not put in the disinfection cabinet.

4, banned in the microwave oven heating.

5, use the scratch hard objects / clean the cup body surface image, otherwise it will lead to a cup body image off.